1760DGT_slash_2.jpg 1760DGT_slash_2.jpg

1760DGT/2

PDF documents

​Digital automotive multimeter, portable, with 2-channel oscilloscope and waveform generator

Includes a 2-channel oscilloscope.

Out of stock

$1,507.76
Request Item
Product codeArticleStock
0176000081760DGT/2

Information

KIT CONTENTS:
– multimeter tips
– 2 BNC crocodile clips for oscilloscope
– tip probe for oscilloscope (1X and 10X)
– battery charger
– nylon sheath

TECHNICAL DATA
Display: 2.8″ colour TFT
Resolution: 320 x 240 pixels
Power supply: 100V-240V AC, 50Hz-60Hz; DC INPUT 5V DC-2A
Battery: 2 x 2600 mAh

MULTIMETER SPECIFICATIONS
Test: Voltage, Current, Resistance, Capacity, Diodes and On-Off
Max. voltage: 600V DC
Max. current: 10A DC
Max. resistance: 40MOHM
Max. capacity: 100uF

OSCILLOSCOPE SPECIFICATIONS
Horizontal
Bandwidth: 40MHz
Sampling frequency range: 250MSa/s (single channel) – 125MSa/s (double channel)
SEC/DIV range: 5ns/div ÷ 500s/div 1,2,5 sequence
Vertical
VOLTS/DIV range: 10mV/div÷10V/divat BNC input
Selectable analogue, bandwidth limit, typical: 20MHz
Low frequency response (-3db): ≤10Hz a BNC
DC Gain Accuracy: ± 3% for Normal or Medium acquisition mode, 10V/div ÷ 10 mV/div
Trigger
Type: Edge
Mode: Auto, Normal, Single
Slope: Rising, Falling, Rising, & Falling
Source: CH1, CH2
Input
Coupling: DC, AC or GND
Supported probe attenuation factors: 1X, 10X, 100X, 1000X
Arbitrary waveform generator
Waveform frequency: Sine (1Hz÷25MHz), Square (1Hz÷10MHz), Ramp (1Hz÷MHz), EXP (1Hz÷5MHz)
Width: 2.5Vpp (50Ω) – 5Vpp (high impedance)
Output impedance: 50Ω

Dimensions: 199 x 98 x 40 mm
Weight: 624g

Additional information

Weight 1263 g
Dimensions 245 × 180 × 90 mm

There are no reviews yet.

Be the first to review “​Digital automotive multimeter, portable, with 2-channel oscilloscope and waveform generator”

Your email address will not be published. Required fields are marked *